They're back! Our *redesigned* Jug Plug works great with any Utility Jug with a 3/4" NPT thread. Remove the nozzle from the cap and screw the Jug Plug in for safe storing and transportation.  

Wrapping the Jug Plug in Teflon tape is recommended when screwing it into our Billet Aluminum VP Jug Cap or our Billet Aluminum LC2 Jug Cap. Teflon tape is not required when screwing into a standard plastic cap.

This is more than just a cap, it is a work of art! It represents good old American Ingenuity (the A.I. in Ai13). This signature piece represents the hard work of a team doing everything it can to rebuild after being turned upside down by 2020 and all of the other challenges we've had to overcome manufacturing products in the USA.  We are proud of this product and know you will love it!  Sometimes you just need to go all-in and ditch the plastic cap and top it off with a BADASS premium quality 6061 billet aluminum cap.

These Aluminum Caps fit on both VP Jugs and Tuff Jugs!

 

Kit Includes:

• 1 qty Billet Aluminum, Engraved, VP Jug Cap with a Viton O-Ring

If you're looking for a vent cap that goes above and beyond, you've found it. The Ai13 Billet Aluminum VP Vent Cap is a work of art, representing the best of American ingenuity. We're proud to offer this premium quality product, made from 6061 billet aluminum and stainless steel. It's the perfect way to top your vent off and add a touch of class!

VENT CAP WILL FIT:

• VP Racing 5 Gallon Utility Jugs
• Tractor Supply 5 Gallon Utility Jugs

 

Kit Includes:

 1 qty Billet Aluminum VP Vent Cap, a Viton seal, and a Stainless Steel Tether.

 

This is more than just a jug cap, it is a work of art! It represents good old American Ingenuity (the A.I. in Ai13). This signature piece represents the hard work of a team doing everything it can to rebuild after being turned upside down by 2020 and all of the other challenges we've had to overcome manufacturing products in the USA.  We are proud of this product and know you will love it!  Sometimes you just need to go all-in and ditch the plastic cap and top it off with a BADASS premium quality 6061 Billet Aluminum Jug Cap.

 

Kit Includes:

• 1 qty Billet Aluminum, Engraved, LC2 Jug Cap with a Viton O-Ring

 

This LC2 Vent Cap fits all LC jugs. Looking for a way to take your LC jug to the next level? Check out our LC2 Vent Cap! Made of premium quality 6061 billet aluminum, this vent cap is more than just a standard cap - it's a work of art! It represents good old American ingenuity (the A.I. in Ai13). Ditch the boring plastic vent cap and top off your jug with a BADASS LC2 Vent Cap - you won't be disappointed!

 

Kit Includes:

 1 qty Billet Aluminum LC2 Vent Cap, a Viton seal, and a Stainless Steel Tether.

 

Protect your fluids with this Blitz Universal Cap! It fits snuggly on all your Blitz gas cans when the UFN Nozzle isn't in use. 

Protect your fluids with this Coarse Thread Universal Cap! It fits snuggly on all your Briggs, Midwest and Scepter style gas cans when the UFN Nozzle isn't in use. 

We have updated our nozzle caps with easy-to-grip thumb tabs! This cap is included with all our Race, Blitz, or Coarse Thread Nozzle kits, but is available here to purchase if an extra one is needed or to replace your old one.

Never lose track of your liquids again! This E85 identifier cap will help you label your gasoline so you'll never pour out of the wrong can again.

Never lose track of your liquids again! This MX identifier cap will help you label all your mixed gasoline so you'll never accidentally pour out of the wrong can again.

Never lose track of your liquids again! This 91 identifier cap will help you label your liquids so you'll never accidentally pour out of the wrong jug again.

Never lose track of your liquids again! These identifier caps will help you label all your regular gasoline so you'll never accidentally pour out of the wrong can again.

Never lose track of your liquids again! This Ethanol Free identifier cap will help you label your liquids so you'll never accidentally pour out of the wrong jug again.

Never lose track of your liquids again! This Diesel fuel identifier cap will help you label your liquids so you'll never accidentally pour out of the wrong jug again.

Never lose track of your liquids again! These identifier caps will help you label all your water jugs so you'll never accidentally pour out of the wrong can again.

Replace your old, worn, and cracked gas can seals to quickly bring your gas can back to its original condition! No more leaking or dripping from the connection between your fuel can and spout. These are made from High-Quality Viton Chemical Resistant rubber, which has proven to be more durable and reliable overtime.

The PAX Nozzle Replacement Cap may be used on any PAX Fuel Containers with the stock black threaded screw cap.

PAX Cap without Gasket - If using the Ai13 Replacement Cap with the nozzle stored inside the can (Ai13 or the stock nozzle), you do not need to place a Viton O-ring on the cap.

PAX Cap with Gasket - If you are using the Ai13 Replacement Cap with the nozzle stored outside the can, you will need to place a Viton O-ring on the cap to create a tight seal.

 

We do not recommend modifying any container from the way it was originally manufactured. MOST IMPORTANTLY, DO NOT REMOVE ANY FLAME SAFETY DEVICES PROVIDED BY THE ORIGINAL MANUFACTURER.

IMPORTANT NOTE: Rotopax does not endorse or authorize the use of any Ai13 products on any of their products. Ai13 is not affiliated, connected, associated, endorsed, or sponsored by the above-named manufacturers. They do not assume any liability for injuries caused by the use of Ai13 products. Our Pax Nozzle should not be considered an official RotoPax spout or nozzle replacement.

Replace your old, worn, cracked gas can seals to quickly bring your gas can back to its new condition. No more leaking or dripping from the connection between your fuel can and spout. 

Depending on the fuel type you are using, the blue hose may have become stiff or damaged overtime. If you find that your hose isn't as flexible as it was originally and you would like to replace it, you may choose from one of the options below.

 

We have recently upgraded our blue hose to this white hose! We are always striving to provide the best product materials possible, and our research has proven this to be a better hose option.

The price listed is PER EACH hose that you need replaced. 

YOU REPLACE	This option allows you to purchase the 12" Hose and replace it yourself. Please make sure you have the tools and resources available to do this. Video instructions for easy removal and replacement are posted here on the product page and can also be emailed to you. ----------------------------------------------------
WE REPLACE	This option allows you to send it back to us using your preferred shipping method. Once received, we will replace the hose for you and ship it back within 1-2 days.  ----------------------------------------------------
REFURBISH & REPAIR	We know the use of your nozzle is important to you, so to prevent any downtime of you not being able to use it, we will ship you out a "Like-Brand New" nozzle. Once you receive the replacement nozzle, use the included prepaid shipping label and packaging to send the defective nozzle(s) back to us. This price covers shipping costs both ways and labor to repair and refurbish the nozzle.  *If we don't receive the defective nozzle(s) within 2 weeks, you will be billed for the cost of a brand new nozzle(s).

If you have any questions please contact us via email at ai13billetproducts@ai13.us

*Please ensure you have added a Race, Blitz or Coarse Thread Nozzle to your cart when adding this item.

Do you need additional length on your nozzle? We can custom build a nozzle for you!

It's a $10 set-up fee and additional length is $6.00/foot (or .50¢ an inch if you need less than a foot). The custom length selected above is IN ADDITION to our standard hose length of 14".  If you don't see a length listed, please contact us and we'll be happy to add it!